Credits

Sponsors of Awards

The Solid Modeling Association would like to thank the following generous sponsors who have over the years helped to fund awards recognizing outstanding research in solid modeling.

The Bézier Award has been sponsored by:
credits-logo-rapidform credits-logo-solidworks

 

 

 

 

The Best Paper Award at the ACM Solid and Physical Modeling Conference has been sponsored by:
credits-logo-siemenscredits-logo-solidworkscredits-logo-autodesk

 

 

 

 

Acknowledgement for This Site’s Pictures

All pictures used in this WEB site are from CAD papers of previous SPM conferences’ special issues. The pictures are from the following specific papers:

  • M. Yang and H. Chao, “ECISER: Efficient Clip-art Image Segmentation by Re-rasterization”, Computer-Aided Design, Vol 58, pp 105-116, 2015.
  • D. Wang, C. He, X. Li and J. Peng, “Progressive point set surface compression based on planar reflective symmetry analysis”, ”, Computer-Aided Design, Vol 58, pp 34-42, 2015.
  • J. Li, W. Xu, Z. Cheng, K. Xu and R. Klein, “Lightweight wrinkle synthesis for 3D facial modeling and animation”, Computer-Aided Design, Vol 58, pp 117-122, 2015.
  • L. Liu, Y. Zhang, Y. Liu and W. Wang, “Feature-preserving T-mesh construction using skeleton-based polycubes”, Computer-Aided Design, Vol 58, pp 162-172, 2015.
  • J. Peethambaran and R. Muthuganapathy, “Reconstruction of water-tight surfaces through Delaunay sculpting”, Computer-Aided Design, Vol 58, pp 62-72, 2015.
  • X. Wang, X. Ying, Y.J. Liu, S.Q Xin, W. Wang and X. Gu, W. Mueller-Witting and Y. He, “Intrinsic computation of centroidal Voronoi tessellation (CVT) on Meshes”, Computer-Aided Design, Vol 58, pp 51-61, 2015.
  • J. Kosinka, M. A. Sabin and N. A. Dodgson, “Control vectors for splines”, Computer-Aided Design, Vol 58, pp 173-178, 2015.
  • S. Marras, L. Vasa, G. Brunnett and K. Hormann, “Perception-driven adaptive compression of static triangle meshes”, Computer-Aided Design, Vol 58, pp 24-33, 2015.
  • Z. Kuang, Z. Li, X. Jiang, Y.Liu and H. Li, “Retrieval of non-rigid 3D shapes from multiple aspects”, Computer-Aided Design, Vol 58, pp 13-23, 2015.
  • H.D. Hwang and S.H. Yoon, “Constructing developable surfaces by wrapping cones and cylinders”, Computer-Aided Design, Vol 58, pp 230-235, 2015.
  • M. Yang and H. Chao, “ECISER: Efficient Clip-art Image Segmentation by Re-rasterization”, Computer-Aided Design, Vol 58, pp 105-116, 2015.
  • Y. Cai, X. Guo, Z. Zhong and W. Mao, “Dynamic meshing for deformable image registration”, Computer-Aided Design, Vol 58, pp 141-150, 2015.
  • J. Mizrahi and G. Elber, “Topologically guaranteed bivariate solutions of under-constrained multivariate piecewise polynomial systems”, Computer-Aided Design, Vol 58, pp 210-219, 2015.
  • F. Liu, T. Martin, S.K Yeung and M. Gross, “Efficient direct rendering of deforming surfaces via shared subdivision trees”, Computer-Aided Design, Vol 58, pp 132-140, 2015.
  • X. Chen, L. Chen and M. Shi “A highly solid model boundary preserving method for large-scale parallel 3D Delaunay meshing on parallel computers”, Computer-Aided Design, Vol 58, pp 73-83, 2015.
  • M. Bizzarri and M. Lavicka, “On modeling with rational ringed surfaces”, Computer-Aided Design, Vol 58, pp 151-161, 2015.
  • X. Zhang, Y.J. Kim and D. Manocha, “Continuous penetration depth”, Computer-Aided Design, Vol 46, pp 3-13, 2014.
  • M. S. Ebeida, M.A. Awad, X. Ge, A.H, Mahmoud, S.A, Mitchell, P.M. Knupp and L.Y Wei, “Improving spatial coverage while preserving the blue noise of point Sets”, Computer-Aided Design, Vol 46, pp 25-36, 2014.
  • W. Yu, K. Zhang, S. Wan and X. Li, “Optimizing polycube domain construction for hexahedral remeshing”, Computer-Aided Design, Vol 46, pp 58-68, 2014.
  • Q. Pan, G. Xu and Y. Zhang, “A unified method for hybrid subdivision surface design using geometric partial differential equations”, Computer-Aided Design, Vol 46, pp 110-119, 2014.
  • X. Wang and X. Qian, “An optimization approach for constructing trivariate B-spline solids”, Computer-Aided Design, Vol 46, pp 179-191, 2014.
  • K. Karciauskas and J. Peters, “Modeling with rational biquadratic splines”, Computer-Aided Design, Vol 46, pp 1350-1359, 2011.
  • M.S. Ebedia, S.A. Mitchell, A.A Davidson, A. Patney, P.M. Knupp and J.D. Owens, “Efficient and good Delaunay meshes from random points”, Computer-Aided Design, Vol 43, pp 1506-1515, 2011.
  • W. Yu, K. Zhang, S. Wan and X. Li, “Optimizing polycube domain construction for hexahedral remeshing”, Computer-Aided Design, Vol 46, pp 58-68, 2014.
  • L. Fu, L. B. Kara and K. Shimada, “Modeling flow features with user-guided streamline parameterization”, Computer-Aided Design, Vol 46, pp 263-268, 2014.
  • W. Yu, K. Zhang, S. Wan and X. Li, “Optimizing polycube domain construction for hexahedral remeshing”, Computer-Aided Design, Vol 46, pp 58-68, 2014.
  • A. Myles and J. Peters, “C2 splines covering polar configurations”, Computer-Aided Design, Vol 46, pp 1322-1329, 2011.
  • T. Varady, A. Rockwood and P. Salvi, “Transfinite surface interpolation over irregular n-sided domains”, Computer-Aided Design, Vol 43, pp 1330-1340, 2011.
  • Y.j. Kim, M.s. Kim and G. Elber, “Precise convex hull computation for freeform models using a hierarchical Gauss map and a Coons bounding volume hierarchy”, Computer-Aided Design, Vol 46, pp 252-257, 2014.
  • M. Zhang and Y. He, “A simple and local method for computing quasi-conformal map on 3D surfaces”, Computer-Aided Design, Vol 46, pp 192-199, 2014.
  • S. Xu and J. Keyser, “Geometric computation and optimization on tolerance dimensioning”, Computer-Aided Design, Vol 46, pp 129-137, 2014.
  • F. Boussuge, J.C. Leon, S. Hahmann and L. Fine, “Extraction of generative processes from B-Rep shapes and application to idealization transformations”, Computer-Aided Design, Vol 46, pp 79-89, 2014.
  • X. Ying, Z. Li and Y. He, “A parallel algorithm for improving the maximal property of Poisson disk sampling, Computer-Aided Design, Vol 46, pp 37-44, 2014.

 

INTERIA Web Design & Development